Inkjet Printable Media

8 mil

Featured, POP/ Indoor Signage, Posters, Trade Show Graphics, Banner Stands, Banners, Temporary Outdoor Signage

Gloss

Latex, Aqueous

Opaque

Banner, Polypropylene

Polypropylene (100% Recyclable Material)

85%

94 CIE

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available printers using dye ink should be set for the highest print quality and media selection should be "Photopaper". When using UV inks, the "heavy weight coated" option should be selected. Ink coverage up to 300% is recommended.

Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability.

Pressure sensitive vinyl laminates, like LexJet Elite UV Vinyl, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.

Due to the absorptive nature of the coating, you should avoid touching the coated surface. It's always recommended that cotton gloves be used when handling inkjet coated materials. Rolls of LexJet film are supplied with the coated side facing out.

70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.