DSS 15oz. is a blockout banner material with a uniquely constructed dual print surface. DSS 15oz. is engineered for high resolution, two-sided printing. Itisideal for any indoor application where opacity is required. DSS 15oz. works with solvent, eco-solvent, UV, screenprinting and Latex inks. Available in widths from 54”–126”. ... Read More
Banner, Vinyl: Banner Media
Compatible with Solvent, Latex, Eco-Solvent, UV Curable Printers
DSS 15oz. is a blockout banner material with a uniquely constructed dual print surface. DSS 15oz. is engineered for high resolution, two-sided printing. Itisideal for any indoor application where opacity is required. DSS 15oz. works with solvent, eco-solvent, UV, screenprinting and Latex inks. Available in widths from 54”–126”.
| Product Type | Inkjet Printable Media |
| Paper Weight | 500 gsm |
| Applications - Media | Banners |
| Ink Type | Solvent |
| Latex | |
| Eco-Solvent | |
| UV Curable | |
| Media Opacity | Opaque |
| Media Type | Banner |
| Vinyl: Banner |
| Properties | Description |
| Material | Polyester |
| Total Weight | 500 g/m2 or 15 oz/yd2 |
| Tensile Strength | 114/105 (lbs/inch) |
| Tear Strength | Weft 4.4, Warp 6.6 |
| Temperature Resistance | -40 to 70° C or -40 to 158° F |
| Fungus Resistant | Yes. ASTM G21 |
| Flame Resistance | Class A flame rating. Test Method DIN 4102 B1. NFPA701, Title 19, CSFM, B1 |
| Grommeting | Grommets should be placed in the hemline along the length of the banner so that the grommet is through two layers. Corner grommets should be placed where the length and width hems cross, so that the grommet is through four layers. A reinforced corner is also recommended to increase durability. |
| Tape & Stitched Hem | Banner tape can be used and is preferred to sewing. If sewing, a double-stitched hem is recommended with a maximum of five stitches per inch. Banner tapes at least 4-mils thick perform the best. For more information see LexJet's Banner Tape. |
| Finishing/Post Process | Always use pressure-sensitive laminates (LexJet Elite UV vinyl is recommended). Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for at least 2 hours. A 24 hour dry time is ideal. |
63 in x 164 ft - 1 Roll (1 in Core)
Compatible with Solvent, Latex, Eco-Solvent, UV Curable Printers
Earn 360 points
54 in x 164 ft - 1 Roll (3 in Core)
Compatible with Solvent, Eco-Solvent, Latex, UV Curable Printers
Earn 308 points
38 in x 164 ft - 1 Roll (3 in Core)
Compatible with Solvent, Eco-Solvent, Latex, UV Curable Printers
Earn 228 points
