LexJet's 5 Mil White Backer Low Melt is a white, polyester film designed to be applied to the back of a display graphic to add rigidity and opacity. The extra rigidity makes graphics easier to handle and install. The whiteness of the film provides the opacity needed to ensure that graphics remain readable in a wide range of lighting conditions.
The film is called low-melt because it is backed by a heat-activated (thermal) adhesive that softens and starts bonding to the print at lower temperatures than conventional thermal laminating films
The low-melt adhesives bond so well that trade-show graphics protected on the front by a LexJet ArmorGuard or DisplayGuard film and on the back by the 5 Mil White Backer are guaranteed not to experience any tunneling or delaminating even when the graphic panels are repeatedly rolled and unrolled for transport from one trade-show site to the next.
|Gauge||Surface: 1 mil Polyester Film; Adhesive: 4 mil Coextrusion|
|Heat Seal Initiation||180° F (78° C) 1/2 sec. dwell @ 40 psi|
|Opacity||Test Method: ASTM 1003: 11% Transmission|
|Processing Temperature Range||180° to 245° F|
|Coefficient of Friction||Test Method: ASTM D 1894. .40 Kinetic|