Picture of LexJet Simple Flo Wrap Vinyl- 54in x 150ft

LexJet Simple Flo Wrap Vinyl- 54in x 150ft

LexJet's Simple Flo Wrap Vinyl is a 2.4-mil, glossy white, ultra-conformable calendared adhesive-backed vinyl for wrapping vehicles, trucks, buses, and walls.


... Read More

Brand: LexJet
SKU: SFLO54150
UPC: 848412005134
Price: $397.00 ($0.59 / SQ. FT.)
Availability: 29 in stock

LexJet's Simple Flo Wrap Vinyl is a 2.4-mil, glossy white, ultra-conformable calendared adhesive-backed vinyl for wrapping vehicles, trucks, buses, and walls with graphics. The air-egress release liner on this high-performance vinyl enables air to escape as the graphics are installed, eliminating trapped air pockets that cause wrinkles and bubbles. Because the adhesive is repositionable, misaligned graphics are easy to fix during installation. Simple Flo Wrap Vinyl can be used with LexJet’s Simple Flo Wrap Gloss UV laminate (2.4 Mil) to create a durable wrap that is removable for 1 year and permanent for up to 7 years. This vinyl/laminate combination performs well over rivets, corrugations, slight to moderate curves and flat surfaces. LexJet’s Simple Flow Wrap Vinyl works well on a wide variety of printers that use solvent, low-solvent and UV-curable inks. It offers substantial cost savings over cast-vinyl solutions.

  


 

Wall Mural Banner

Technical Specifications

Product Type Inkjet Printable Media
Thickness 2.40 mil
Applications - Media Featured
POP/ Indoor Signage
Vehicle Graphics
Wall Murals
Outdoor Signage
Finish Gloss
Ink Type UV Curable
Solvent
Eco-Solvent
Latex
Media Opacity Opaque
Media Type Vinyl: Calendered
Adhesive Backed
Core Size 3 in
Width 54 in
Length 150 ft
Units 1 Roll
Double Sided No
Properties Description
Material Ultra-conformable Calendared PVC (Gloss)
Gauge 2.4 mil
Adhesive .8 to 1.1 mil Gray repositionable solvent acrylic
Release Liner 90# air egress liner
Total Gauge 3.3 mil
180° Peel Adhesion 40 oz/in. to stainless steel
Printer/Ink Compatibility Compatible all inkjet printers using eco solvent, solvent, latex and UV-curable ink.
Software Settings Printer settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 30° C, platen 33° C and post-heat 35° C have been found as a good place to start.
Color Matching For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available use one of the onboard media settings for cast vinyl.
Finishing/Post Processing For wrap applications, partner with LexJet Simple Flo Wrap Gloss UV Laminate (2.4 mil). Before finishing, trimming and installing the graphic, allow the image to completely evaporate and dry for a minimum of 24 hours to ensure the solvents are gone from the print. Failure to do so may facilitate solvent penetration, resulting in vinyl degradation. Application surface should always be cleaned, tested and checked for defects before applying the LexJet Simple Flo Wrap Vinyl solution. This product can be installed using the wet application method.
Light Fastness The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Removability/Expected Life Removable for up to one year under normal exposure conditions from most common substrates. Beyond one year, the adhesive becomes permanent and durable up to seven years. Recommend testing for specific usage.
Optimal Print Environment 70° F (21° C), 50% R.H
Service Temp. Range -40° - 176° F (-40° C to 80° C).
Minimum Application Temp. 40° F
Shipping Instructions Always roll graphics with the thinnest material facing out. When both materials are the same thickness, always roll them in the same way every time. LexJet recommends rolling the graphic with a minimum 12 inch diameter.
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%