Properties |
Description |
Adhesive |
A 1.2-mil, clear, permanent, rubber-based pressure sensitive adhesive. |
Carrier |
.5 mil clear polyester |
Release Liner |
74# polycoated, moisture-resistant |
Peel Adhesion |
PSTC #3; backed with 1 mil polyester, exposed Side - over 80oz./inch width, liner Side - over 80oz./inch width |
Shear Strength |
(PSTC 7, 1 sq. in., 1000 gr. load): no dwell @ 72° , Exposed side - 7+ Days, Liner side - 7+ Days. |
Laminator Compatibility |
It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores. |
Laminator Settings |
Apply 80-100 psi and use 2-3 feet per minute for dwell time. Between 90° to 100° F heat is recommended to help the adhesive flow. |
Service Temp. Range |
-40° F to 257° F (-34° to 125° C ) THIS IS NOT A LAMINATOR SETTING. |
Ideal Storage Conditions |
70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging. |
Shelf Life |
1 year from the LexJet ship date when stored in proper conditions. |
Tip |
The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. Ask your LexJet solutions specialist for specific recommended mounting substrates. All substrates should be tested for your specific application prior to final job production. |