Picture of LexJet Performance Matte UV Vinyl Laminate (3 Mil)- 43in x 150ft

LexJet Performance Matte UV Vinyl Laminate (3 Mil)- 43in x 150ft

LexJet Performance Matte UV Vinyl Laminate 3 Mil, combines quality, value, economy, and performance for all types of interior graphics. The 3 mil matte-finish ... Read More

Brand: LexJet
SKU: GSMAT43150
Price: $192.00 ($0.36 / SQ. FT.)

LexJet Performance Matte UV Vinyl Laminate 3 Mil, combines quality, value, economy, and performance for all types of interior graphics. The 3 mil matte-finish laminate is designed to add significant profit for applications like event graphics, legal and corporate presentations, point-of-purchase, and more.

LexJet Performance Matte Vinyl Laminate 3 Mil was previously known as GraphicShield Matte.

Technical Specifications

Product Type Laminates & Coatings
Adhesive Type Pressure Sensitive
Applications Banner
Outdoor Signage
Trade Show
Banner Stand
POP / Indoor Signage
Posters
Backlit
Finish Matte
Laminate & Coating Type Pressure Sensitive
Material Vinyl (PVC)
Thickness 3 mil
Core Size 3 in
Width 43 in
Length 150 ft
Units 1 Roll
Properties Description
Material 3 mil calendared PVC film
Adhesive Acrylic-based pressure sensitive adhesive
Release Liner 4 mil
Peel Adhesion (Test method PSTC-1): Stainless Steel= 48 oz./in
Floor Graphics Slip Rating No
UVA Block No
Inkjet Media Preparation Printer manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer.
Laminator Compatibility It's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator Settings No HEAT REQUIRED. Apply 40-80 psi and use 2-5 feet per minute for dwell time. The top and bottom web tension should be minimal, so memory will not be a factor.
Adhesive Cure Time After applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Min. Application Temp 50° F (10° C)
Ideal Storage Conditions 70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life 1 year from the LexJet ship date when stored in proper conditions.
Tip It is not recommended that you pre-coat any paper-faced products, such as Gator Board or Foam Core, with an adhesive that has a plastic carrier. The absorptive nature of paper products can cause the board to contract and expand with temperature and humidity fluctuations causing the release liner to tunnel. The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. All substrates should be tested for your specific application prior to final job production.

Customer Reviews


  • Only registered users can write reviews

Review Breakdown 0 review(s)

5
0%
4
0%
3
0%
2
0%
1
0%