Existing Customers

Click "Sign In" below to access your account

Sign In to an exsiting account
New Customers

Click "Create Account" to register with lexjet.com

Create an Account
Customer Service
Call (800)453-9538 Call (800)453-9538
Shopping Cart Summary
  • Qty
  • Item
  • Price
Your shopping cart is currently empty
0 item(s) in cart


51in x 75ft (3in Core) - Lifetime Warranty
Item: DFPL105175
UPC: 848412005295
View More Options
  • YOUR PRICE $512.00
  • SQ. FOOTAGE:$1.61/SQ. FT.
Share |
  • PreLume technology makes prints instantly look brighter, whiter, and more vibrant
  • The 2-mil, high-performance acrylic adhesive helps ensure that the laminating film maintains a strong, permanent bond to the graphic
  • Medium-gauge, rigid co-polymer laminating film for pop-up booth graphics as well as a clear backer
  • Velvet-textured finish prevents glare from affecting the readability of the graphics

LexJet Elite Textured Coex Laminate 10 Mil with PreLume® technology is a rigid, medium-gauge, co-polymer laminating film that can enhance both the look and durability of graphics that will be repeatedly be hung with Velcro® hook-and-loop tape to the fabric panels of pop-up trade-show booths. This film is easier-to-trim and handle than polycarbonate or Lexan.

When applied to graphics output on a printable white film, such as LexJet’s White DuPont Melinex Polyester Film, the finished graphics will instantly look brighter and whiter. That’s because the PreLume® optical reflection technology offsets yellow and gray color shifts that can occur in printable papers and films.

Instead of tweaking printer settings or color profiles and reprinting the graphics, simply apply this film and the colors in your graphics will immediately look brighter and truer to the original design. Plus, PreLume helps extend the life of the printed graphic by keeping it from yellowing over time.

The 2-mil, high-performance acrylic adhesive on LexJet Elite Textured Coex Laminate 10 Mil helps ensure that the laminating film maintains a strong, permanent bond to the graphic.

LexJet Elite Textured Coex Laminate 10 Mil was previously known as LexJet 10 Mil PreLume® DisplayFlex®.

Specifications are provided by the manufacturer. Refer to the manufacturer for an explanation of the print speed and other ratings.
Material10 mil clear velvet/textured rigid co-polymer film
Adhesive2 mil optically clear, high performance, solvent-based, permanent acrylic adhesive with patented PreLume® technology
Release Liner1.5 mil clear oriented polyester
Peel Adhesion(Test method PSTC-1): 24 hour dwell 44 oz./in
Tensile Strength(ASTM D-882): 7000 psi
Shear StrengthPSTC 7, 1 sq. in.,: 350+ hours no failure
Elongation(ASTM D-882): 170%
UVA Light ProtectionYes. Not recommended for long term outdoor use.
Inkjet Media PreparationPrinter manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer.
Laminator CompatibilityIt's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator SettingsApply 80-100 psi and use 2-3 feet per minute for dwell time. Between 90° to 120° F heat is recommended, but heat is not required. The top and bottom web tension should be minimal.
Using a SledIt is strongly recommended that you use a rigid sled (1/8" or thicker) such as polycarbonate, acrylic, masonite or aluminum. This will ensure consistent pressure across the web. Apply a release liner to your sled to prevent adhesive build-up. Use strong tape, such as packaging tape, to attach the entire width of the leading edge of the graphic to the sled.
Adhesive Cure TimeAfter applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Floor Graphics Slip RatingTest Method: ASTM D 1894; .40 Kinetic
Min. Application Temp.50° F (10° C)
Ideal Storage Conditions70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life1 year from the LexJet ship date when stored in proper conditions.
TipIf you are experiencing curl when applying this backer and the tension on your pull rollers is minimal, reduce the heat, reduce the pressure and reduce the speed of your take-up reel.
TipIt is not recommended that you pre-coat any paper-faced products, such as Gator Board or Foam Core, with an adhesive that has a plastic carrier. The absorptive nature of paper products can cause the board to contract and expand with temperature and humidity fluctuations causing the release liner to tunnel. The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. All substrates should be tested for your specific application prior to final job production.
TipIf you are experiencing curl when applying this backer to LexJet and the tension on your pull rollers is minimal; reduce the heat, reduce the pressure and reduce the speed of your take-up reel
Product Performance & Suitability: All of the descriptive information and recommendations for the use of LexJet products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by LexJet. All purchasers of LexJet products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.
LexJet Matte Light Block Polyester (12 Mil)- 50in x 100ft
Item: LBP1250 | UPC: 848412004700
In Stock
  • YOUR PRICE $508.00
  • SQ. FOOTAGE:$1.22/SQ. FT.
LexJet Elite Textured Coex Laminate (10 Mil)- 38in x 75ft
Item: DFPL103875 | UPC: 848412005271
In Stock
  • YOUR PRICE $383.00
  • SQ. FOOTAGE:$1.61/SQ. FT.