Existing Customers

Click "Sign In" below to access your account

Sign In to an exsiting account
New Customers

Click "Create Account" to register with lexjet.com

Create an Account
Customer Service
Call (800)453-9538 Call (800)453-9538
Shopping Cart Summary
  • Qty
  • Item
  • Price
Your shopping cart is currently empty
0 item(s) in cart


38in x 150ft (3in Core)
Item: OCA338
View More Options
  • YOUR PRICE $500.00
  • SQ. FOOTAGE:$1.05/SQ. FT.
Share |
  • New and improved optically clear mounting adhesive, now easier to use with no orange peel effect, at a lower cost
  • Ideal for face-mounting backlit graphics to acrylic, Plexiglas, Lexan, polycarbonate or glass
  • Clear polyester film coated on both sides with an optically-clear permanent adhesive

LexJet CrystalClear Permanent Adhesive provides the exceptional clarity and ease of use needed for face-mounting graphics to rigid, clear surfaces including acrylic, Plexiglass, Lexan, polycarbonate or glass. It is a popular choice for mounting backlit images, and can also be used to mount motion- or 3D-graphics to lenticular lenses.

CrystalClear Permanent Adhesive consists of a thin, clear polyester film coated on both sides with an optically clear, permanent adhesive. A clear polyester release liner protects each side of the film until the adhesive is ready to apply.

Specifications are provided by the manufacturer. Refer to the manufacturer for an explanation of the print speed and other ratings.
Adhesive1-mil, super clear, permanent acrylic pressure sensitive adhesive
Carrier1 mil clear polyester
Release Liner2 mil, 40# polycoated Kraft paper
Peel Adhesion(PSTC 1, modified for 72 hour dwell time): Stainless steel = 41 oz./in.; Acrylic = 2 oz./in.; Glass = 39 oz./in.
Shear Strength(PSTC 7, 1 hour dwell, 1 sq in, 4 lb load): 100+ hours no failure
Tack(ASTM D2979-88): 350 gm/sq. cm
Laminator CompatibilityIt's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator SettingsApply 80-100 psi and use 2-3 feet per minute for dwell time. Between 90° to 100° F heat is recommended, to help the adhesive flow will produce a more consistent adhesion to the print. All substrates should be tested for your specific application prior to final job production.
Using a SledIt is strongly recommended that you use a rigid sled (1/8" or thicker) such as polycarbonate, acrylic, masonite or aluminum. This will ensure consistent pressure across the web. Apply a release liner to your sled to prevent adhesive build-up. Use strong tape, such as packaging tape, to attach the entire width of the leading edge of the graphic to the sled.
Adhesive Cure TimeAfter applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Service Temp. Range-20° F to 257° F (-29° to 125° C ) THIS IS NOT A LAMINATOR SETTING.
Ideal Storage Conditions70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life1 year from the LexJet ship date when stored in proper conditions.
Application RecommendationsThis product can be applied using wet or dry method
Product Performance & Suitability: All of the descriptive information and recommendations for the use of LexJet products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by LexJet. All purchasers of LexJet products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.
LexJet CrystalClear Permanent Adhesive- 24in x 150ft
Item: OCA324
In Stock
  • YOUR PRICE $315.00
  • SQ. FOOTAGE:$1.05/SQ. FT.
LexJet CrystalClear Permanent Adhesive- 51in x 150ft
Item: OCA351
In Stock
  • YOUR PRICE $670.00
  • SQ. FOOTAGE:$1.05/SQ. FT.