Existing Customers

Click "Sign In" below to access your account

Sign In to an exsiting account
New Customers

Click "Create Account" to register with lexjet.com

Create an Account
Customer Service
Call (800)453-9538 Call (800)453-9538
Shopping Cart Summary
  • Qty
  • Item
  • Price
Your shopping cart is currently empty
0 item(s) in cart

General Formulations

60in x 100ft - 1 Roll (3in Core)
Compatible with Eco-Solvent, Latex, Solvent Printers
Item: 23260100
General Formulations
View More Options
  • YOUR PRICE $578.00
  • SQ. FOOTAGE:$1.16/SQ. FT.
Share |
  • CBS Outdoor approved for use in all bus and train wrap applications
  • Recommended for flat vertical vehicle windows and commercial store windows
  • 6-mil perforated window vinyl with a clear removable adhesive and a 50/50 perforation pattern with 1.5 mm holes

General Formulation’s Concept 232 is a 6-mil perforated window vinyl with a clear removable adhesive and a 50/50 perforation pattern with 1.5 mm holes. It is recommended for flat vertical vehicle windows and commercial store windows. CBS Outdoor approved for use in all bus and train wrap applications. The two-layer perforated liner allows trouble-free printing with UV curable, solvent and latex inks.

  • Easy to print and apply
  • Cleanly removable from glass for one year
  • Designed for exterior mounted window graphics
  • Lay flat liner offers good dimensional stability
  • For use with UV Curable, latex, low-solvent and solvent inks
  • CBS Approved
Specifications are provided by the manufacturer. Refer to the manufacturer for an explanation of the print speed and other ratings.
Technical Specification
MaterialFlexible vinyl film with 50% open area and a hole size of .060 inches (1.5 mm).
Gauge 6 mil
Adhesive.8 to 1.1 mil removable pressure sensitive adhesive
Release Liner 84# lay flat liner
180° Peel Adhesion 32 oz/in. to glass
Printer/Ink CompatibilityCompatible all inkjet printers using latex, eco-solvent and solvent ink. Not recommended for use with UV Curable printers.
Software SettingsPrinter settings will vary between printer manufacturers. Recommended heater settings: Pre-heat 30° C, platen 33° C and post-heat 35° C have been found as a good place to start.
Color MatchingFor the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. However, if these tools are not available use one of the on-board media settings for cast vinyl.
Finishing/Post Processing Pressure-sensitive vinyl laminates, like Simple Flo Wrap Gloss UV Laminate or Optically Clear Cast Gloss Laminate, can be applied to increase the fade and abrasion resistance of the image. Before applying the laminate, allow the image to dry for 24 hours.
Light FastnessThe fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Removability/Expected LifeThe removable pressure sensitive adhesive is designed for clean removal from glass. Life expectancy for exterior use is up to 1 year under normal exposure conditions.
Vehicle RegulationsWhen this product is used on vehicles some states have minimum light transmission regulations. The user of this product is responsible for complying with these regulations.
Optimal Print Environment70° F (21° C), 50% R.H
Service Temp. Range-40° - 176° F (-40° C to 80° C).
Minimum Application Temp.40° F
Ideal Storage Conditions70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life1 year from the LexJet ship date when stored in proper conditions.
Product Performance & Suitability: All of the descriptive information and recommendations for the use of LexJet products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by LexJet. All purchasers of LexJet products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.
Technical Specification