Existing Customers

Click "Sign In" below to access your account

Sign In to an exsiting account
New Customers

Click "Create Account" to register with lexjet.com

Create an Account
Customer Service
Call (800)453-9538 Call (800)453-9538
Shopping Cart Summary
  • Qty
  • Item
  • Price
Loading...
Your shopping cart is currently empty
0 item(s) in cart
Subtotal:
$0.00
Checkout
 
 

LexJet

51in x 150ft (3in Core)
Item: TFLEX551150
UPC: 848412005462
LexJet
View More Options
  • YOUR PRICE $398.00
  • SQ. FOOTAGE:$0.62/SQ. FT.
Share |
  • ASTM-rated for floor graphics
  • For indoor use only
  • 5-mil, copolymer pressure-sensitive laminating film with glare-inhibiting, velvet-textured surface
  • Great choice for banner-stand graphics, trade-show displays, and POP signage

LexJet Performance Textured Polypropylene Laminate 5 Mil is a versatile, pressure-sensitive, laminating film that can be used to economically produce a wide range of graphics on less costly cold-roll laminators. Made from a proprietary co-polymer film, it is more rigid and has less curl than vinyl films. It also doesn’t yellow, and may appeal to environmentally-conscious customers who prefer avoiding the use of vinyl materials,

With a price point equivalent to thermal laminating films, LexJet Performance Textured Polypropylene Laminate 5 Mil can be used to produce graphics for banner stands, trade-show displays, and POP signage. And it meets ASTM standards for the production of slip-resistant floor graphics.

LexJet Performance Textured Polypropylene Laminate 5 Mil was previously known as LexJet 5 Mil T-Flex.

 
Specifications are provided by the manufacturer. Refer to the manufacturer for an explanation of the print speed and other ratings.
Main Specifications
Product Description LexJet 5 Mil T-Flex
Media Type Polypropylene
Media Size Roll (51 in x 150 ft)
Adhesive

Optically clear water-based pressure-sensitive

PropertiesDescription
Material5 mil Polypropylene
AdhesiveOptically clear, high performance, solvent-based pressure sensitive acrylic adhesive
Release Liner1.5 mil clear oriented PET
Peel Adhesion(Test method PSTC-1): 50 oz./in
Shear StrengthPSTC 7, 1 sq. in., 1000 gr. load: 96 hours no failure
Floor Graphics Slip RatingPassed (ASTM D 2047)
UVA BlockYes, 90-95%
Inkjet Media PreparationPrinter manufacturers recommend that you allow your print to dry for a minimum of 24 hours before lamination. In areas with high humidity dry times can be longer.
Laminator CompatibilityIt's recommended that your laminator be equipped with a release liner take-up reel. All LexJet laminates are provided on 3" standard cores.
Laminator SettingsApply 40-80 psi and use 2-5 feet per minute for dwell time. Between 90° to 120° F heat is recommended to prevent silvering for cold lamination. If running this product in combination with a thermal backer, use a low-melt backer which activates between 190° -200° F, such as LexJet Low Melt Laminates. The top and bottom web tension should be minimal, so memory will not be a factor.
Adhesive Cure TimeAfter applying the laminate, allow curing for a minimum of 2 hours before cutting or trimming. Maximum bond strength is reached in 24 hours.
Min. Application Temp50° F (10° C)
Ideal Storage Conditions70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Shelf Life1 year from the LexJet ship date when stored in proper conditions.
TipIt is not recommended that you pre-coat any paper-faced products, such as Gator Board or Foam Core, with an adhesive that has a plastic carrier. The absorptive nature of paper products can cause the board to contract and expand with temperature and humidity fluctuations causing the release liner to tunnel. The slip aid, which is often found on PVC materials, should be removed with a suitable detergent. All substrates should be tested for your specific application prior to final job production.
Product Performance & Suitability: All of the descriptive information and recommendations for the use of LexJet products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by LexJet. All purchasers of LexJet products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (Including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.
LexJet RubberMount Clear Adhesive- 51in x 300ft
LexJet
Item: RBMNT51300 | UPC: 848412006599
In Stock
  • YOUR PRICE $654.00
  • SQ. FOOTAGE:$0.51/SQ. FT.
LexJet Performance Textured Polypropylene Laminate 5 Mil- 38in x 150ft
LexJet
Item: TFLEX538150 | UPC: 848412005455
In Stock
  • YOUR PRICE $299.00
  • SQ. FOOTAGE:$0.63/SQ. FT.
LexJet Performance Textured Polypropylene Laminate 5 Mil- 41in x 150ft
LexJet
Item: TFLEX541150
In Stock
  • YOUR PRICE $394.00
  • SQ. FOOTAGE:$0.77/SQ. FT.
LexJet Performance Textured Polypropylene Laminate 5 Mil- 54in x 150ft
LexJet
Item: TFLEX554150 | UPC: 848412005479
In Stock
  • YOUR PRICE $423.00
  • SQ. FOOTAGE:$0.63/SQ. FT.